Premium floors,
finished like art.
ArNy Coatings is a GTA-based, owner-operated epoxy and polyaspartic installer for garages, basements, commercial and industrial spaces. Prep is the key — and we offer several coating systems, including our flagship one-day Polyaspartic/Flake garage install, backed by a 5-year warranty.
Request a free quote
Tell us about your floor and we’ll reply within 24 hours with a clear next step.
Floor systems built for performance and style.
From decorative flake to luxury metallic and heavy-duty commercial coatings — the right system is chosen for your concrete, your use and your look.
Epoxy Flake
Decorative, slip-resistant chip floors for garages, basements and utility spaces. Our most popular residential finish.
Get a quote →Metallic Epoxy
Hand-poured, high-gloss marbled floors for showrooms, retail, cannabis and feature spaces. Colour-matched to your brand.
Get a quote →Polyaspartic
Fast-cure, UV-stable, hot-tire-rated topcoats. One-day install, year-round application down to −10°C.
Get a quote →Commercial & Industrial
Chemical-resistant novolac and double-broadcast quartz systems for shops, warehouses and manufacturing.
Get a quote →Epoxy vs. Polyaspartic — what’s the difference?
Both are premium resin floors, but they cure differently and shine in different places. Here’s the honest breakdown, so you know exactly what you’re paying for and why.
Epoxy
The classic build coat — thick, hard and high-adhesion. It’s the foundation most floor systems are built on.
- Thick, high-build coat that bonds hard to prepped concrete
- Impact- and chemical-resistant (novolac grades for harsh chemicals)
- Lower material cost — strong value over larger areas
- Cures slowly — vehicles usually back on it after several days
- Not UV-stable on its own — can amber in direct sunlight
- Needs a warm, dry slab to go down properly
Polyaspartic
The fast, tough topcoat — cures in hours, stays clear in sunlight, and shrugs off hot tires and road salt.
- Fast cure — walk in hours, drive in ~24–48h (true one-day installs)
- UV-stable — won’t yellow or chalk in sunlight
- Flexible, abrasion- and hot-tire-resistant; handles freeze-thaw
- Installs across a wide temperature range, even in the cold
- Higher material cost than epoxy
- Short working time — demands an experienced installer
The ArNy answer: the right system for the floor.
Our flagship one-day garage install runs a full Polyaspartic/Flake system — that’s what makes it a true same-day floor with UV stability and hot-tire resistance, backed by our 5-year warranty. Where build, budget or chemical resistance matter more — basements, warehouses, industrial — we spec an epoxy system instead. You get the coating your space actually needs, not a one-size kit.
Prep Like Pros.
Diamond-ground floor prep
Most floors fail at the prep, so we don’t cut it. Every slab is mechanically opened to a true concrete surface profile with state-of-the-art Husqvarna equipment and diamond tooling — a fast, even, dust-controlled cut. Cracks and joints are then chased and filled so the coating bonds into the concrete, not onto a sealed surface that peels.
XPS-certified
Trained directly at XPS headquarters in the US — the manufacturer behind our polyaspartic and epoxy systems. Factory-level standards, materials and methods on every floor, with no cut corners.
Premium finishes that look like art — backed by a warranty
Clean edges, seamless coats and UV-stable polyaspartic topcoats built for real use. Our flagship one-day garage install is backed by a written 5-year warranty with no fine-print exclusions.
From bare slab to showpiece.
A properly installed system changes how a space looks, feels and performs. Here’s a look at what we install across the GTA.
Built for the way the space is used.
Garages
Hot-tire-rated, salt-resistant floors that look like a showroom and install in a single day.
Garage floor coatings →Basements
Moisture-tested, seamless floors that turn utility space into clean, usable square footage.
Basement floor coatings →Warehouses
Heavy-load quartz and novolac systems for carts, equipment and constant traffic.
Retail & Cannabis
Seamless, non-porous, inspection-ready floors for dispensaries, barbershops and shops.
Showrooms
Metallic and high-gloss finishes that make products and vehicles the centre of attention.
Gyms & Industrial
Abrasion- and chemical-resistant coatings for fitness, manufacturing and shop floors.
Five steps. No shortcuts.
This is exactly how we install a one-day polyaspartic garage floor — from diamond grind to topcoat, completed in a single day with the slab fully prepped and tested first.
Diamond grind
Mechanical prep to a proper concrete surface profile for a true bond.
Repair & test
Cracks and joints filled; slab moisture-tested and primed.
Base & broadcast
Full solid polyaspartic base coat with decorative flake broadcast to refusal.
Polyaspartic topcoat
Full solid, UV-stable polyaspartic topcoat — hot-tire-rated and walkable within hours.
Inspect & warranty
We walk the floor with you and hand over a written 5-year warranty.
Beautiful, and built to work.
A professionally prepped and sealed floor protects the concrete, cuts dusting and stands up to daily life.
Long-lasting
Proper prep and premium coatings resist wear, traffic and hot tires for years.
Easy to clean
Seamless, non-porous surfaces wipe clean — no grout lines, no dusting.
Slip-resistant
Flake and textured options improve traction in garages, shops and wet areas.
Adds value
A finished floor makes a garage, basement or showroom feel complete and premium.
“Great company with excellent results, this flooring was done for family, 10/10 for ArNy!”
“Should’ve had this done for my flooring a long time ago. Highly recommended service and operator!”
“Amazing service. Did flake epoxy for garage gym and came out very nice. Timely delivery and would hire them again for future projects.”
Based in Mississauga. Across the Greater Toronto Area.
Same standards, same owner, no travel surcharge within the GTA. Explore our local pages for Mississauga, Toronto and Brampton.
Frequently asked questions.
How much does epoxy flooring cost in the GTA?
How long does installation take?
Will it hold up to Ontario winters and hot tires?
Do you handle residential and commercial projects?
What makes a coating last?
An owner-operator who actually does the work.
ArNy Coatings is a GTA-based epoxy and polyaspartic flooring company run hands-on by its XPS-certified owner. We took the trade seriously enough to train at the manufacturer’s headquarters — and we bring that same standard to every garage, basement and commercial floor we pour.
Fully insured, WSIB-covered and HST-registered, we keep it simple: proper prep, premium materials, clean workmanship and floors that look the part while standing up to real GTA use.
Prep Like Pros. Finish Like Art.
Ready to transform your floor?
Book your free estimate this week — no hidden charges, no obligation. We measure, test the slab and hand you a clear written quote.